Rheem TXV valve replacement cost usually ranges from $250 to $900 depending on valve type, refrigerant, and labor. Buyers should expect an average total near $450 for a standard residential split system; high-end jobs (hard-to-access systems or R-410A line sets) push toward $700-$900.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Complete TXV replacement (parts + labor) | $250 | $450 | $900 | Assumptions: single-family home, easy access, common refrigerant. |
| Replacement valve only | $45 | $125 | $320 | Per unit price varies by model and refrigerant compatibility. |
| Labor (installed) | $120 | $240 | $480 | Assumes $75-$125 per hour, 1–4 hours. |
What a Rheem TXV Valve Replacement Typically Costs
For a common Rheem residential split system, expect a total price of $250-$900 with an average near $450. This average assumes a single TXV swap, normal access, and no major line or coil repairs.
Per-unit valve pricing is typically $45-$320 depending on model and whether it’s a OEM Rheem valve or generic equivalent; installation adds $75-$125 per hour. Assumptions: Midwest labor rates, standard materials, normal access.
Labor, Parts, Tools, and Disposal Appearing on a Typical Quote
A typical contractor quote breaks into parts, labor, equipment/extra tools, and disposal or recovery fees. Expect the valve part to be 15%-40% of the total price on most residential jobs.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $45-$320 (valve, fittings, brazing rods) | $120-$480 () | $20-$120 (vacuum pump rental, gauges) | $0-$150 (rare for minor HVAC repair) | $15-$75 (refrigerant recovery, disposal) |
How Valve Type, Refrigerant, And System Size Affect Final Price
Valve material and refrigerant compatibility drive part cost: capillary vs. adjustable TXVs and R-410A-rated valves cost more. R-410A-specific valves commonly add $40-$120 versus older R-22 compatible valves.
Two key numeric drivers: valve compatibility and system tonnage. A larger system (3–5 ton) or multi-stage Rheem unit often requires a higher-flow valve costing $150-$320; 1–2 ton systems usually use $45-$140 valves.
Ways To Lower Rheem TXV Replacement Price Without Sacrificing Reliability
Buyers can reduce cost by supplying the valve model, scheduling off-peak service, and bundling with other HVAC maintenance. Providing the correct OEM part number can cut parts markup by $20-$80.
Other practical options: accept a compatible aftermarket valve ($45-$120) instead of OEM ($125-$320), or combine the TXV swap with planned coil or line repairs to reduce multiple trip fees.
How Prices Vary Across U.S. Regions For HVAC Valve Replacements
Labor-driven regional differences typically shift total cost ±15%-35% from the national average. Expect urban/Coastal rates 15%-30% above Midwest averages and some rural areas 10%-20% below urban rates.
Example deltas: a $450 average in the Midwest becomes $520-$585 in high-cost coastal cities and $360-$405 in lower-cost rural markets. Assumptions: same job scope and parts.
Typical Crew Size, Job Time, And Hourly Rates For A TXV Swap
Most Rheem TXV replacements use a single technician; labor time ranges 1–4 hours depending on access and additional tasks. Plan for 1–2 hours for straightforward swaps and up to 4 hours for brazing, evacuation, and leak checks.
Hourly rates are commonly $75-$125 per hour. Use the mini-formula: to estimate labor line items in quotes.
Three Real-World Quote Examples With Specs And Pricing
Example A — Small split system, easy access: 1-ton, R-410A compatible generic valve, 1.5 hours labor. Total: $250 ($65 valve + $135 labor + $50 equipment/recovery).
Example B — Mid-size home, OEM valve: 2.5-ton Rheem, OEM TXV, moderate access, 2.5 hours. Total: $490 ($175 valve + $250 labor + $65 tools/disposal).
Example C — Hard access, multi-stage system: 4-ton, OEM high-flow valve, brazing required, 4 hours, possible coil work. Total: $820 ($290 valve + $400 labor + $130 extras/permit).
