Most homeowners pay $350-$1,200 to replace a Goodman evaporator coil; average installs run about $600-$900 including parts and labor. This article lists expected Goodman evaporator coil price ranges, per-unit rates, and the main drivers that push a quote higher or lower. Assumptions: residential split-system, accessible attic or closet access, standard R-410A system.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Coil Only (standard 2–3 ton) | $200 | $450 | $800 | OEM vs aftermarket, 2–3 ton range |
| Installed (2–3 ton) | $350 | $750 | $1,200 | Includes labor, basic brazing, leak test |
| Complex Install (med-high) | $700 | $1,100 | $1,800 | Plenum mods, multiple refrigerant lines |
| Evacuation & Recharge | $80 | $150 | $350 | Depends on refrigerant type and leak repair |
What Buyers Pay For A Goodman Evaporator Coil Replacement
Typical total price for replacing a Goodman evaporator coil ranges from $350 to $1,200 for a 2–3 ton residential unit; the nationwide average is about $750. Buyers generally see coil-only prices of $200-$800 and labor of $150-$600 depending on access and brazing complexity.
Assumptions: single-family home, standard access, standard R-410A charge, no major duct modifications.
Breaking Down The Quote: Materials, Labor, Equipment, and Disposal
| Materials | Labor | Equipment | Delivery/Disposal |
|---|---|---|---|
| $200-$800 (coil, gaskets, fittings) | $150-$600 () | $40-$150 (vacuum pump, gauges) | $0-$150 (old coil disposal) |
Material cost dominates for OEM Goodman coils; labor rises if brazing, manifold work, or plenum changes are required.
How Coil Size, System Type, and Refrigerant Change The Final Price
Coil size and system compatibility strongly affect price: 1.5–2 ton coils commonly cost $200-$450, 2.5–3.5 ton coils $350-$700, and 4+ ton commercial coils $600-$1,500+. Choosing a different refrigerant (retrofit to R-410A or R-22 reclaim) can add $150-$600 for evacuation and recharge.
Examples of numeric thresholds: line sets longer than 20 feet often add $50-$200; coil cabinet modifications add $200-$600; converting from R-22 to R-410A often requires new TXV or orifice adding $100-$350.
Specific Ways To Cut The Goodman Evaporator Coil Price
Control scope to reduce cost: replace only the coil if the condenser is sound, schedule work in off-peak seasons for lower labor rates, and provide clear access to reduce crew hours. Preparing the site (clearing attic access, moving stored items) can save $75-$200 in labor.
Other actions: get three written quotes, accept a refurbished OEM coil if acceptable ($150-$350), and bundle with planned condenser or thermostat work for contractor discounts of 5%-15% on labor.
How Regional Labor Rates and Climate Affect Expected Quotes
Prices vary by region: urban Northeast and West Coast rates are typically 10%-30% higher than Midwest averages; rural areas may add travel minimums. Expect about +20% in California/NY metro markets and -10% in lower-cost Midwestern markets for similar work.
| Region | Typical Installed Range | Relative Delta |
|---|---|---|
| Midwest | $350-$850 | Baseline |
| Northeast (urban) | $500-$1,050 | +10%–+25% |
| South | $350-$900 | -5%–+5% |
| West Coast | $600-$1,200 | +15%–+30% |
Typical Labor Time, Crew Size, and Hourly Rates For Coil Replacement
Standard replacement usually takes 2–6 hours with a two-person crew; complex jobs run 6–12 hours or more. Hourly rates commonly fall in $75-$125 per technician per hour.
Mini estimate: 3 hours × 2 techs × $95/hr = $570 labor for an average accessible job. Add vacuuming and recharge time: 1-2 hours extra when evacuating and charging refrigerant.
Common Add-Ons, Repairs, and When Costs Jump
Frequent add-ons include leak repairs ($150-$600), TXV replacement ($80-$250), plenum or cabinet modification ($200-$600), and extended refrigerant runs (>20 ft) adding $50-$300. Discovering a hidden leak that requires multiple service calls can move a $750 job to $1,500+.
| Item | Low | Average | High |
|---|---|---|---|
| Leak Repair | $150 | $300 | $600 |
| TXV or Valve | $80 | $150 | $350 |
| Plenum/Flashing Work | $200 | $350 | $600 |
| Refill/Reclaim Refrigerant | $80 | $150 | $350 |
Three Real-World Quote Examples To Match Budget Scenarios
| Scenario | Specs | Labor Hours | Per-Unit Rates | Total |
|---|---|---|---|---|
| Basic Replace | Goodman 2.5 ton, easy access | 3 hrs, 2 techs | Coil $400; $95/hr | $700-$800 |
| Moderate Job | Goodman 3 ton, 25 ft line set, TXV | 6 hrs, 2 techs | Coil $600; extra parts $200 | $1,050-$1,300 |
| Complex | 4 ton, plenum mod, leak repair | 8-12 hrs, 2-3 techs | Coil $900; repairs $400 | $1,600-$2,400 |
Use these concrete examples to compare contractor quotes against the local averages shown earlier.
