The Fantech Flex 100H price varies by whether a buyer purchases the bare unit, adds insulated ducting, or pays for professional installation; typical buyers pay between the unit-only price and a full-installation total depending on scope. Expect a unit price plus installation and accessories to determine the final cost.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Unit Only | $180 | $260 | $350 | Assumptions: USA retail, OEM new unit, no controls. |
| Basic Install (bathroom) | $150 | $275 | $450 | Assumptions: 1–2 hours, short duct run, accessible attic. |
| Full Install with Accessories | $350 | $650 | $1,100 | Assumptions: new ducting, controls, backdraft damper, medium difficulty. |
| Replacement / Retrofit | $250 | $475 | $900 | Assumptions: patching ceiling, disconnecting old wiring. |
Typical Total Price For a Fantech Flex 100H Ventilation Fan
Most homeowners pay between $350 and $650 for a Fantech Flex 100H installed in a single bathroom under normal conditions; the bare unit price is significantly lower. A straightforward swap with minimal ducting usually totals $350-$500.
Assumptions: single-family home, single bathroom, 6–12 linear ft of duct, standard 120V wiring, Midwest labor rates.
Breakdown Of Unit, Labor, Accessories, And Installation Phases
The full quote typically includes the fan, mounting accessories, ducting, electrical labor, and any control devices or remote dampers. Material plus labor usually splits roughly 40% materials and 60% labor for retrofit installs.
| Materials | Labor | Equipment | Delivery/Disposal | Accessories |
|---|---|---|---|---|
| $180-$350 | $150-$400 | $0-$75 | $0-$75 | $25-$200 |
| Fan, basic mounting | Electrician/installer 1–4 hrs | Lift, ladder rental if attic access | Old fan disposal, small tip fees | Dampers, inline controls, insulated duct |
How Duct Length, Static Pressure, And Location Change The Final Quote
Long duct runs, high static pressure systems, or runs through unconditioned spaces increase cost; adding 20+ linear feet of insulated duct often adds $60-$200 in materials and 1–3 extra labor hours. Static pressure over 0.5 in. w.g. typically requires a higher-capacity fan or booster, raising total cost by $100-$300.
Numeric thresholds: 0–12 ft (standard), 12–30 ft (+$60-$150), 30+ ft (+$150-$300). Attic/roof penetrations add $75-$250 depending on flashing and insulation work.
Specific Ways Homeowners Can Reduce The Fantech Flex 100H Price
Buy the unit from an online supplier, do simple prep work, or schedule work during the contractor’s slow season to lower the overall cost. Removing old fixtures and clearing attic access before the installer arrives can save 30–60 minutes of labor time.
- Choose basic grille and avoid remote controls to save $20-$150.
- Bundle multiple bathroom installs to reduce per-unit labor markup.
- Replace only damaged ducting rather than full runs when feasible.
Regional Price Differences: Urban, Suburban, And Rural Examples
Prices vary with geography—urban areas and coastal markets often have higher labor rates; expect 10%–30% variation. An identical install that costs $450 in the Midwest may be $520-$650 in a coastal metro.
| Region | Typical Installed Price | Delta vs Midwest |
|---|---|---|
| Midwest | $350-$650 | Baseline |
| Northeast / Coastal | $420-$800 | +20%–+30% |
| South / Sun Belt | $340-$600 | -5%–+10% |
| Rural | $300-$550 | -10%–0% |
Common Add-Ons, Controls, And Replacement Scenarios That Affect Price
Extra features such as humidity sensors, timers, or wireless controls add $40-$200; insulated flex duct and a quality backdraft damper add $30-$120. Upgrading to a smart humidity control typically costs $80-$200 installed.
- Basic timer: $20-$60 installed.
- Humidity sensor: $40-$120 installed.
- Insulated 4″ flex duct: $4-$9 per ft installed.
Three Real-World Quote Examples With Specs And Labor Estimates
Practical quotes help compare likely totals. Including unit, 12 ft duct, and 2 hours of labor is the most common mid-range scenario.
| Scenario | Specs | Labor Hours | Total |
|---|---|---|---|
| Budget Replace | Unit only, reuse duct, no control | 0 (DIY) | $180-$260 |
| Standard Install | Unit + 12 ft insulated duct + damper | 1.5–2.5 hrs | $350-$550 |
| Complex Retrofit | New duct run 30 ft, attic work, sensor | 3–5 hrs | $700-$1,100 |
Estimated Job Time, Crew Size, And Typical Contractor Rates
Most installs are single-tech jobs taking 1–4 hours; electricians charge $75-$125 per hour for wiring work. Plan for a 1–2 person crew and 1–4 hours depending on complexity.
Assumptions: electrician hourly $75-$125, general installer $50-$95, typical job 1–4 hours.
