Mica heater bands are compact, temperature-stable solutions for heating plastic injection equipment. This guide highlights five reliable 110V, 380W 35x35mm band heaters, featuring rust-resistant steel shells, clamp-type lock-ups, and notched sleeves for quick installation. Compare key specs and practical benefits to choose a model that fits your nozzle size and production needs.
The following quick-reference table lists the chosen products to help you compare at a glance:
| Product | Brand | Voltage | Power | |
|---|---|---|---|---|
| Saim 110V 380W Injected Mould Heating Element Band Heater 35x35mm (1 PCS) | Saim | 110V | 380W | Rust resistant steel sheath; 1 unit |
| YXQ 110V 380W Injected Mould Heating Element Band Heater 35x35mm (2Pcs) | YXQ | 110V | 380W each | Includes 2 pieces; clamp-type lock-up |
| Nxtop 110V 380W Injected Mould Heating Element Band Heater 35x35mm (2-PCS) | Nxtop | 110V | 380W each | Double-pack; notched sleeve for installation |
| YXQ 110V 380W Injected Mould Heating Element Band Heater 35x35mm | YXQ | 110V | 380W | Rust resistant sheath; 1 unit |
| Heater Bands 110V 380W Injected Mould Heating Element Band Heater 35x35mm (1PCS) | Saim | 110V | 380W | Rust resistant; single unit |
Saim 110V 380W Injected Mould Band Heater 35x35mm
The Saim 35x35mm band heater uses a rust-resistant steel sheath with a stainless steel clamp-type lock-up. Its notched sleeve enables straightforward installation, and the unit sits flush with the nozzle hex. Specifications include 380W power at 110V. Inner diameter mentions 1.4 inches, with braid lead length of about 12.2 inches. Ideal for single-unit replacement in compact injection equipment.
YXQ 110V 380W Injected Mould Heating Element Band Heater 35x35mm
YXQ’s 35x35mm band heater features a rust-resistant steel sheath and a stainless steel clamp-type lock-up. The notched sleeve design ensures smooth installation with a flush fit. It is commonly used in heating devices for plastic injection machines and stuffing containers. Each unit provides 380W at 110V, and the product is often sold as a two-piece set for higher coverage.
Nxtop 110V 380W Injected Mould Heating Element Band Heater 35x35mm
Nxtop offers a 35x35mm injected mould heater with 110V and 380W, designed for easy installation thanks to a rust-resistant steel sheath and a stainless steel clamp-type lock-up. The notched sleeve allows precise positioning, delivering flush mounting at the nozzle area. It is marketed primarily for heating devices in plastic injection machines, with a 110V supply and 380W heating capacity.
YXQ 110V 380W Injected Mould Heating Element Band Heater 35x35mm
This YXQ model mirrors the common 35x35mm form factor with a rust-resistant steel sheath and stainless steel clamp-type lock-up. It uses a notched sleeve for installation and sits flush with the nozzle hex. The unit is designed for plastic injection machine components, rated at 380W and 110V, matching the standard mica band heater profiles for small to mid-size tooling.
Heater Bands 110V 380W 35x35mm (1PCS)
This single-unit Saim heater band adheres to the same architecture: rust-resistant steel sheath, stainless steel clamp-type lock-up, and a notched sleeve for installation that remains flush with nozzle hex. The 110V, 380W rating aligns with typical mica-insulated band heaters used for localized heating in plastic processing equipment. Lead length is about 12.2 inches to accommodate standard wiring runs.
Band Heater 900 Deg F 1 in Dia. 120V
This Tempco unit is a larger diameter option, rated to 900 degrees Fahrenheit, with a 1 inch inside diameter and 120V supply. While not explicitly labeled as mica, it represents a relevant category for users exploring high-temperature band heating on similar platforms. Consider limits of mica insulation and the specific nozzle geometry when comparing to 35x35mm models.
Buying Guide: Key Considerations For Choosing Mica Band Heaters
When selecting a mica-insulated band heater for injection molding or plastic processing, these factors help ensure optimal performance and reliability.
- Size and fit: Match the inner diameter to your nozzle or heater collar. Common small sizes like 35x35mm support tight installations with flush mounting.
- Voltage and wattage: Most compact units use 110V and 380W. Verify your equipment’s power supply and thermal requirements to avoid under- or over-heating.
- Shell material and clamp design: Rust-resistant steel sheaths and stainless steel clamp-type locks provide durability and secure mounting.
- Installation features: Notched sleeves facilitate alignment; flush mounting reduces heat loss and mechanical interference with moving parts.
- Lead wire length: Ensure braid lead length (often around 12 inches) affords enough clearance to wiring harnesses and temperature controls.
- Usage context: These heaters are commonly used in plastic injection machines and stuffing containers; confirm compatibility with your specific material and process.
- Pairing and redundancy: Some models are available as multi-pack options (e.g., 2Pcs) for broader coverage or higher resilience in production lines.
- Temperature tolerance: While many units target 380W at 110V, consider your required maximum process temperature and insulation type for safety and performance constraints.
